Saturday, October 12, 2019

Scuba Diving Essay -- essays research papers

This Essay will illustrate some of the basic aspects of scuba diving. It will show the steps involved in assembling the scuba gear. The price range of scuba gear. The basic principles of diving, and were to go to get certified in scuba diving. It will also reveal some fun things that can be done while diving . The assembly of the scuba gear is very simple. First have your tank filled to the recommended amount of pressure (usually 3000 psi). Take the tank with the valve handle to the right, and set it in front of you. Next take the Buoyancy Compensator (B.C.) and attach it to the tank by putting the straps around the tank and tightening them. After the tank is secure, check to make sure that the O’ring on the valve of the tank is in place and in good condition. loosen the first stage of the regulator and place it over the valve of the tank. Then tighten the first stage securely, but not overly tight. Attach your octopus to the B.C. Then Pick up the pressure gauge and point it away from the body, and others. Turn the handle on the tank, to supply the regulator and gauges with air pressure. The gauges are pointed away from the body to avoid injury if the gauge were to malfunction. Listen for any leaks, and read the gauge and make sure that it is some what close to the pressure that was put in to the tank. Last you need to inflate the B.C.,and purge the regulator to make sure that they work properly. The gear is now ready to be used. Scuba gear is very affordable. Sc...

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.